General

Edcon Steel sells a variety of round 304 grade Stainless Square Steel Tube for many architectural applications .  A Square Stainless Steel Tube will be generally have a wall thickness of 0.51 - 6.0mm. Tube sizes are measured in outside sizes.  Finally tube will generally have a mechanical finish or polish applied in the mill.   Stainless Steel Square Tube  is available in a variety of grades, finishes and materials. 

Characteristics

304 Grade Stainless steel Square Tube is stocked in a continuously longitudinal welded tube.  This welding produces a weld seam along the length of the tube.  After welding the tube will pass under an abrasive belt to remove the outside weld bead on the outside surface.  Critically the inside surface weld bead remains in place and this can cause issues in several applications.   Where this is the case seamless or food grade tube should be investigated.   This tube is commonly referred to as "As Welded Brush Polished" AWBP tube.  This is typically an ornamental or handrail tube and comes with a 320, 400 or 600 grit polish.

Common Applications

304 Grade Stainless steel round tube are used for various of applications. Typical pipe applications are:

1. Furniture
2. Architectural
3. Kitchen
4. Handrails and Balustrades

Edcon Steel Tips

1. There are a variety of Square 304 Grade Stainless Steel Tubes also available also at 304 Grade Stainless Steel Rectangular Tubes.  Our steel stores are well stocked in tubes in Mild Steel Square Tube and 6060 Grade Aluminium Square Tubes .
2. The changes in length may be small, however, we recommend customers do their research on the lengths that their selected product comes in.  A small change in the design lengths, can lead to greater product yield and less waste - saving you money.

Telescoping

Most  304 Stainless Steel Square Tubes will be Welded.  This welding process will result in a weld seam.  The external weld seam will be scarfed off resulting in a smooth finish on the external face, but the internal weld seam will remain protruding on the internal face of the tube.  This is important to any customer who is looking to "Telescope" their Round tube or pipe Section.  Telescoping of Circular Hollow tube is common to allow parts to sleeve together or to be extendable with one typically smaller CHS sliding inside a larger CHS.  There is a telescoping chart available on our website.

Surface Protections and Coatings

Unlike mild steel the chemistry of stainless steels means the processes and methods for protecting and finishing 304 Grade Stainless Steel are vastly different to mild steels.  Most surface finishes for stainless steel will be mechanically (Polishing) or chemically (Passivating) applied.    The correct surface finish will have substantial impacts on the performance and appearance of your stainless steel.   

One of the most important considerations for the performance and appearance Stainless Steels is cleanliness.  Surfaces need to be kept free from particles of other metals especially alloy or carbon steels.  Timber also has contaminants that will leech and stain stainless steels.

Due to the variety of finishes available in stainless steels, Edcon Steel strongly recommends you discuss your requirements with your designer or fabricator.

All Steel   |  All 316 Grade Stainless Steel   |  All 316 Grade Stainless Steel Rectangular Tube  |  All 316 Grade Stainless Steel Hollow Bar  |  Mild Steel Square Tubes  |  Home