Tools & Gear Taps & Dies HSS-Co5 Spiral Point (Gun Nose) Taps

• 12 x 1.75 Spiral Point (GUN) DIN 376 HSS-Co5 Tap - Goliath
• HSS-Co Bright Finish Reduced Shank Metric Coarse Spiral Point Machine Tap.
• HSS-Co Spiral Point Long Series Tap made to DIN 376 standard.
• Reduced shank taps have a smaller shank diameter than full-diameter taps.
• Reduced shank taps are designed for through hole applications in materials with high tensile strength.
• Spiral point taps, also known as "Gun nose taps", have straight flutes supplemented by angular cutting faces at the lead.
• The design of the cutting portion propels the swarf ahead of the tap leaving the flutes clear for the flow of coolant to the cutting teeth.
• Primarily designed for use in through holes, these taps can be used in blind holes provided that there is ample clearance beyond the threaded section to accommodate the swarf.
• The advantages of a gun nose tap are the shearing action of the angular cutting faces, which produces a fine finish on the threads and shallower flutes.
• This allows a stronger cross section throughout the tap.
• Metric Coarse angle of thread is 60 degrees.
• The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well.
• Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength.
• The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimetres).
• Manufactured from HSS-Co5.