Express Cut
SL-4NF-Non-Ferrous Burr-1/2
Tools & Gear Burrs Express Cut
Non-Ferrous Cut Burrs Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging. Applications Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium brass copper bronze coarse plastic hard rubber reinforced plastic and fibreglass composite Usage It may be necessary to alter the running speeds from those shown in the speed chart in order to achieve optimum performance Harder materials require slower running speeds Smaller burrs require faster running speeds Long shank burrs require slower speeds for safety reasons Apply constant movement and light pressure when using the burr Running below the optimum speed will cause chipping Running above optimum speed will cause premature tooth wear Allowing the burr to become too hot may cause the braze to soften - and cause the head to become detached from the shank Using tools and collets which have become worn will cause chipping Do not sink the burr for more than one third of its periphery
Recommended Products
Express Cut
SA-52-Cylindrical Burr-5/32
Express Cut
SA-1NF-Non-Ferrous Burr-1/4
Express Cut
SA-43-Cylindrical Burr-1/8