NOTICE    -     Website upgrades are  taking place from 1am Thursday 28 March 2024   -   This will effect our website  until 9 am on Good Friday   -  We apologise for the inconvenience       

Buy Taps & Dies Hss Hand And Machine Taps Hss Tap Brass

HSS Hand and Machine Taps

HSS Tap Set Brass-5/16x26

Stock Code : BORD3060-5-16TS

Tools & Gear Taps & Dies HSS Hand and Machine Taps

BRASS (BSB)BRITISH STANDARD BRASS Brass tubing has a uniform wall thickness - irrespective of the tube diameter - therefore any thread cut on - or in - it needs to have the same depth - so 26 TPI is standard on all BSB diameters. BSB is often confused with BS Cycle thread - the difference being that brass thread has an angle of 55 deg; whereas Cycle is 60 deg;. TAPER TAPS have a lead of eight threads and are used as a starting tap in difficult or high precision holes. INTERMEDIATE TAPS have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole. BOTTOMING TAPS have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole. Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap. Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.

Recommended Products

HSS Hand and Machine Taps

HSS Hand and Machine Taps

HSS Tap Set Brass-7/16x26

HSS Hand and Machine Taps

HSS Hand and Machine Taps

HSS Tap Set Brass-5/16x26

HSS Hand and Machine Taps

HSS Hand and Machine Taps

HSS Tap Set Brass-3/8x26