NOTICE    -     Website upgrades are  taking place from 1am Thursday 28 March 2024   -   This will effect our website  until 9 am on Good Friday   -  We apologise for the inconvenience       

Buy Taps & Dies Hss Hand And Machine Taps Hss Hand And Machine Taps

HSS Hand and Machine Taps

M18 x 2.5 SET DIN376 HSS/COBALT

Stock Code : GOL.C47ED4376

Tools & Gear Taps & Dies HSS Hand and Machine Taps

Reduced Shank Metric Coarse HSS Cobalt Long Series Tap made to DIN 376 standard. Goliath HSS taps provide a high hardness to toughness ratio - compressive and tensile strength - good abrasion resistance and resistance to micro-chipping - ensuring a long tool life. TAPER TAPS have a lead of eight threads and are used as a starting tap in difficult or high precision holes. INTERMEDIATE TAPS have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole. BOTTOMING TAPS have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole. Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap. Manufactured from HSS-Co5 - this modern design tap uses straight flutes supplemented by angular cutting faces at the point to produce a fine finish on the threads. Shallower flutes achieve a stronger cross section allowing the tap to withstand greater cutting forces.

Recommended Products

HSS Hand and Machine Taps

HSS Hand and Machine Taps

1/2 x 12 BSW TAPER MACHINE NUT TAP

HSS Hand and Machine Taps

HSS Hand and Machine Taps

TAP HSS 1.1/8 x 7 UNC BOTTOM

HSS Hand and Machine Taps

HSS Hand and Machine Taps

No. 10 x 24 UNC TAPER MACHINE NUT TAP