NOTICE    -     Website upgrades are  taking place from 1am Thursday 28 March 2024   -   This will effect our website  until 9 am on Good Friday   -  We apologise for the inconvenience       

Buy Taps & Dies Chrome Alloy Taps Chrome Alloy Bspt (rc Series Pipe Taper)

Chrome Alloy Taps

Chrome Tap BSPT Bott.-1/4x19

Stock Code : BORD4248-1-4B

Tools & Gear Taps & Dies Chrome Alloy Taps

BSPTBRITISH STANDARD PIPE TAPER (RC SERIES PIPE TAPER) This is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55 deg;. BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread. The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other. The taper is 1 to 16 - meaning that for each 16 mm increase in the distance from the end - the diameter increases by 1 mm. BOTTOMING TAPS have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.

Recommended Products

Chrome Alloy Taps

Chrome Alloy Taps

Chrome Tap BSPT Bott.-3/8x19

Chrome Alloy Taps

Chrome Alloy Taps

Chrome Tap BSPT Bott.-1/2x14

Chrome Alloy Taps

Chrome Alloy Taps

Chrome Tap BSPT Bott.-1x11